Product Description
SC-60W series UPS backup power supply
Features:
·universal AC inputrange
·Small volume,low weight,high efficiency
·Protections:short circuit/over load
·Indicator for power on/charge/electric supply(LED)
·100% full load burn-in test
·Battery protection at low voltage
·2 Years warranty
Model |
SC-60-12 |
SC-60-24 |
output |
DC voltage |
CH1:13.8V |
CH2:13.4V |
CH1:27.6V |
CH2:26.5V |
Voltage tolerance |
±2% |
----- |
±1% |
----- |
Rated current |
4.0A |
0.5A |
2.0A |
0.3A |
Current range |
0~4.0A |
----- |
0~2.0A |
----- |
Rated power |
55W |
55W |
Ripple&noise |
120mvp-p |
----- |
120mvp-p |
----- |
DCvoltage ADJ.range |
CH1:11.3~14.9V |
CH1:21.3~29.8V |
|
Setup,rise,hold time |
800ms,50ms,80ms/230VAC, 1600ms,50ms,16ms/115VAC |
input |
Voltage range |
90~264VAC,127~370VDC |
frequency |
47~63HZ |
AC current |
0.9A/115VAC,0.45A/230VAC |
efficiency |
81% |
83% |
Inrush current |
Cold start current 25A/115VAC,45A/230VAC |
Leakage current |
<1mA/240VAC |
protection |
Over load |
Rated output power110%~150% start over load protection |
protection mode: AC charging mode:hiccup mode auto-recovery after fault condition is removed |
Batteryprotection
At low voltage |
9.5~11V |
20~22V |
protection mode:cutoff output |
Function |
UPS introduction |
long-term online floating charge to battery,high charging efficiency,battery can saturate to more than 90% ,cauto-stop charging when it's full,prevent over charging. Effectively extend battery life,AC/battery auto switch ,no switch time,no need human guard,
cold-start ,when there is no AC input ,can use battery start UPS,Meet the user's emergency needs |
environment |
Working temp,humidity |
-10ºC~+60ºC,20%~90%RH |
Storagetemp,humidity |
-20ºC~+85ºC,10%~95%RH non-condensing |
Withstand vibration |
10~500HZ,2G10min/1cycle,period for 60 minutes,each axes |
safety |
Withstand voltage |
I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC |
Isolated resistance |
I/P-O/P,I/P-FG,O/P-FG:100Mohms/500VDC |
Fitstandard |
Safety standard |
Compliance to UL60950-1 |
EMC standard |
Compliance to EN55022,CLASSB |
others |
Dimension |
111*78*36mm (L*W*H) |
Weight/packing |
0.3kg/50pcs/16kg/0.027m³/0.96CUFT |
note |
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and25ºCof ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance : includes set up tolerance, line regulation and load regulation. |
|
|
|
|
Payment Terms︰ | T/T /WESTERN UNION |
|
|
Product Image
|